Fast 7DS90B MT Parts
FAST 7DS90B transmission has 7 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With double intermediate shaft structure design, and the Maximum input speed is 2600 RPM. The length of the 7DS90B transmission is 821.3 mm. The 7DS90B manual transmission has 7 gears, and each gear has a different reduction ratio. The 1st gear reduction ratio is 8.171, the 2nd gear reduction ratio is 4.819, the 3rd gear reduction ratio is 3.143, the 4th gear reduction ratio is 2.095, the 5th gear reduction ratio is 1.444, the 6th gear reduction ratio is 1.000, the 7th gear reduction ratio is 0.820, and the reverse gear ratio is 7.543. The 7DS90B manual transmission has an input torque range of 900 N.m. The 7DS90B transmission weight is 260 KG.
FAST 7-speed MT series transmission have different models, with code D in the model name means standard transmission, with code S in the model name means transmission with Double Intermediate Shaft design.
EMAC is the official exporting agent of Fast Group (joint venture of CAT AT transmission), Dongfeng-Dana Axle (Dongfeng and Dana joint venture), Komman air suspension (Leading brand in China in air suspension business line), by integrated all this leading brands together, DuraMac powertrain products covers the products range from diesel/gas engine and engine related system, clutch, transmission, transfer case, main shaft, axle and air suspension.
Advantages of Fast 7DS90B MT Parts
-
It is synchronized with CMI’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.
-
The Holset wastegate valve makes the low speed performance more perfect and the power performance better.
-
The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.
-
The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.
-
Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.
Technical Specifications
Basic Introduction of Shaanxi Fast 7DS90B MT
| Transmission Model: | 7DS90B |
| Transmission Application: | Manual Transmission |
| Input Torque: | 900 N.m |
| Maximum Speed: | 2600 RPM |
| Installation length: | 821.3 mm |
| Weight Iron/Al Alloy: | 260 Kg |
| Fuel Quantity: | 14 L |
| Speed Ratio: | 8.171-0.82 |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
Search by Part No. or Part Name
Click Kit Name to Check Part List
No. | Part No. | Name | Qty. | Remarks |
| 1 | 11066 | Stud Bolt 3/8″ | 4 | — |
| 2 | 12.7G100BGB-T308 | Steel Ball | 4 | — |
| 3 | 14334 | Rear Cover Locating Pin | 2 | — |
| 4 | 14373 | Round Magnet | 3 | — |
| 5 | 14749 | Main Shaft Gear Spline Washer | 3 | — |
| 6 | 14750 | Retaining Ring | 4 | — |
| 7 | 15276 | Vent Plug | 1 | — |
| 8 | 15410-15 | Clutch Housing | 1 | — |
| 9 | 15899 | Switch Activation Pin | 1 | — |
| 10 | 16118 | Main Shaft Sliding Sleeve | 2 | — |
| 11 | 1634 | Shift Fork Shaft Interlock Pin | 2 | — |
| 12 | 1642 | Control Window Gasket | 1 | — |
| 13 | 16463 | Gear Spacer Washer | 1 | — |
| 14 | 16566 | Main Shaft Guide Sleeve | 1 | — |
| 15 | 17106 | Copper Washer | 1 | — |
| 16 | 18701 | Main Shaft Gear Adjustment Washer | 3 | — |
| 17 | 19.05G100BGB-T308 | Steel Ball | 3 | — |
| 18 | 19109 | Oil Seal | 1 | — |
| 19 | 19198 | Countershaft Retaining Ring | 2 | — |
| 20 | 19668 | Countershaft Bearing Baffle | 2 | — |
| 21 | 19673 | Countershaft Square Key | 2 | — |
| 22 | 19694-20 | Input Shaft | 1 | — |
| 23 | 19709 | Sealing Sleeve | 1 | — |
| 24 | 20815 | Lifting Bent Plate | 2 | — |
| 25 | 3220 | Shift Fork Locking Screw | 7 | — |
| 26 | 370309Y | Single-Row Radial Ball Bearing with Retaining Groove and Mounting Notch on Outer Ring | 2 | — |
| 27 | 54015 | CA Bowl-Shaped Plug | 2 | — |
| 28 | 6213N | Deep Groove Ball Bearing with Retaining Groove on Outer Ring | 1 | — |
| 29 | 78CT5737F3 | Self-Aligning Clutch Release Bearing Unit | 1 | — |
| 30 | 791.00.71.0068 | Pressure Switch | 1 | — |
| 31 | 7992 | Speedometer Driven Gear Bushing | 1 | — |
| 32 | Jan-74 | Reverse Lock Spring | 1 | — |
| 33 | 8858 | Input Shaft Nut | 1 | — |
| 34 | 8968 | Reverse Lock Plug | 1 | — |
| 35 | 990.12.71.0041 | Pressure Switch | 1 | — |
| 36 | C01021 | Retaining Ring | 2 | — |
| 37 | C01024 | Input Shaft Bearing Cover Sheath | 1 | — |
| 38 | C01025 | Spacer Sleeve | 2 | — |
| 39 | C01032 | Main Shaft Rear Bearing Cover Oil Seal | 1 | — |
| 40 | C01056 | Stud Bolt | 6 | — |
| 41 | C03004 | Set Screw | 1 | — |
| 42 | C03015 | Gasket | 1 | — |
| 43 | C03016 | Switch Protection Sleeve | 2 | — |
| 44 | C03030 | Cylindrical Pin | 1 | — |
| 45 | C03031-1 | Splined Sleeve | 1 | — |
| 46 | C03032-3 | Shift Joint | 1 | — |
| 47 | C03033-2 | End Cover | 1 | — |
| 48 | C03034-1 | Baffle Gasket | 1 | — |
| 49 | C03035-1 | Shift Selection Head | 1 | — |
| 50 | C03036-1 | Window Cover | 1 | — |
| 51 | C03037-1 | Window Cover Gasket | 1 | — |
| 52 | C03038-2 | Shift Selection Joint | 1 | — |
| 53 | C03039-1 | Washer | 1 | — |
| 54 | C03040-1 | Locating Screw | 2 | — |
| 55 | C03053-1 | Dual H Air Valve Baffle | 1 | — |
| 56 | C04008 | Sheath | 2 | — |
| 57 | C04012-5 | Clutch Release Fork | 1 | — |
| 58 | C04013-1 | Oil Level Label | 1 | — |
| 59 | C04015-1 | Release Strut | 1 | — |
| 60 | C04016-2 | Card Plate | 1 | — |
| 61 | C09035 | Elastic Cylindrical Pin | 2 | — |
| 62 | DS100-1701015 | Transmission Housing | 1 | — |
| 63 | DS100-1701028 | Retaining Ring | 1 | — |
| 64 | DS100-1701029 | Single-Row Radial Ball Bearing with Retaining Groove and Dust Cover on One Side | 1 | — |
| 65 | DS100-1701040-1 | Input Shaft Bearing Cover | 1 | — |
| 66 | DS100-1701042 | Input Shaft Bearing Cover Gasket | 1 | — |
| 67 | DS100-1701049 | Right Countershaft | 2 | — |
| 68 | DS100-1701070 | Transmission Rear Cover | 1 | — |
| 69 | DS100-1701071 | Transmission Rear Cover Gasket | 1 | — |
| 70 | DS100-1701074 | Countershaft Rear Cover | 2 | — |
| 71 | DS100-1701075 | Countershaft Rear Cover Gasket | 2 | — |
| 72 | DS100-1701082 | Reverse Counter Gear | 2 | — |
| 73 | DS100-1701083 | Reverse Counter Gear Shaft | 2 | — |
| 74 | DS100-1701085 | Long Cylindrical Roller Bearing Without Outer Ring | 2 | — |
| 75 | DS100-1701087 | Reverse Thrust Washer | 2 | — |
| 76 | DS100-1701088 | Reverse Lock Washer | 2 | — |
| 77 | DS100-1701105 | Main Shaft | 1 | — |
| 78 | DS100-1701110 | Main Shaft Reverse Gear | 1 | — |
| 79 | DS100-1701111 | Main Shaft 1st Gear | 1 | — |
| 80 | DS100-1701112 | Main Shaft 2nd Gear | 1 | — |
| 81 | DS100-1701113 | Main Shaft 3rd Gear | 1 | — |
| 82 | DS100-1701121 | Main Shaft Reverse Gear Baffle | 1 | — |
| 83 | DS100-1701123 | Main Shaft 1st/2nd Gear Spacer Sleeve | 1 | — |
| 84 | DS100-1701125 | Main Shaft Low Gear Adjustment Washer | 3 | — |
| 85 | DS100-1701126 | Main Shaft Low Gear Spline Washer | 3 | — |
| 86 | DS100-1701130 | Main Shaft 1st/Reverse, 2nd/3rd Gear Sliding Sleeve | 2 | — |
| 87 | DS100-1701131 | Main Shaft Long Hexagonal Key | 1 | — |
| 88 | DS100-1701132 | Main Shaft Short Hexagonal Key | 1 | — |
| 89 | DS100-1701133 | Main Shaft 3rd Gear Baffle | 1 | — |
| 90 | DS100-1701151 | Main Shaft Rear Bearing Cover Gasket | 1 | — |
| 91 | DS100-1701155 | Main Shaft Rear Bearing Cover | 1 | — |
| 92 | DS100-1701156 | Spacer Sleeve | 1 | — |
| 93 | DS100-1702015 | Top Cover | 1 | — |
| 94 | DS100-1702016 | Top Cover Gasket | 1 | — |
| 95 | DS100-1702051 | 1st/Reverse Gear Guide Block | 1 | — |
| 96 | DS100-1702053 | 4th/5th Gear Guide Block | 1 | — |
| 97 | DS100-1702054 | 6th/7th Gear Guide Block | 1 | — |
| 98 | DS100-1702055 | 1st/Reverse Gear Shift Fork | 1 | — |
| 99 | DS100-1702056 | 2nd/3rd Gear Shift Fork | 1 | — |
| 100 | DS100-1702057 | 4th/5th Gear Shift Fork | 1 | — |
| 101 | DS100-1702058 | 6th/7th Gear Shift Fork | 1 | — |
| 102 | DS100-1702061 | Reverse Lock Plunger | 1 | — |
| 103 | DS100-1702063 | 1st/Reverse Gear Shift Fork Shaft | 1 | — |
| 104 | DS100-1702064 | 2nd/3rd Gear Shift Fork Shaft | 1 | — |
| 105 | DS100-1702065 | 4th/5th Gear Shift Fork Shaft | 1 | — |
| 106 | DS100-1702066 | 6th/7th Gear Shift Fork Shaft | 1 | — |
| 107 | DS100-1703024-1 | Limit Sleeve | 1 | — |
| 108 | DS100-1703052-1 | Control Block | 1 | — |
| 109 | DS100B-1701031 | Input Shaft Gear | 1 | — |
| 110 | DS100B-1701052 | Countershaft 4th Gear | 2 | — |
| 111 | DS100B-1701053 | Countershaft 5th Gear | 2 | — |
| 112 | DS100B-1701054 | Countershaft Overdrive Gear | 2 | — |
| 113 | DS100B-1701056 | Countershaft Drive Gear | 2 | — |
| 114 | DS100B-1701114 | Main Shaft 4th Gear | 1 | — |
| 115 | DS100B-1701115 | Main Shaft 5th Gear | 1 | — |
| 116 | DS100B-1701116 | Main Shaft Overdrive Gear | 1 | — |
| 117 | DS90B-1702021 | Nameplate | 1 | — |
| 118 | F91005-1 | Speedometer Adapter | 1 | — |
| 119 | F91054 | Speedometer Drive Gear | 1 | — |
| 120 | F91055 | Speedometer Driven Gear | 1 | — |
| 121 | F91345 | Transverse Shift Lever Bushing | 2 | — |
| 122 | F91353 | Dual H Air Valve Gasket | 1 | — |
| 123 | F91410 | Input Shaft Bearing Cover Oil Seal | 1 | — |
| 124 | F91444 | Oil Seal | 1 | — |
| 125 | F96005 | Gasket | 1 | — |
| 126 | F96006 | Flange Nut | 1 | — |
| 127 | F96035-7 | External Shift Arm | 1 | — |
| 128 | F96036-1 | Compression Spring | 1 | — |
| 129 | F96084 | Compression Spring | 1 | — |
| 130 | F96085 | Compression Spring | 3 | — |
| 131 | F96119 | Dust Cover | 1 | — |
| 132 | F96140 | Gasket | 2 | — |
| 133 | F96141 | Spring Pressure Cover | 2 | — |
| 134 | F99585-1 | Shift Head | 1 | — |
| 135 | F99666 | Side Plate | 1 | — |
| 136 | F99672 | End Pad | 1 | — |
| 137 | F99673 | Spring Seat | 2 | — |
| 138 | F99674 | Spring Spacer Sleeve | 1 | — |
| 139 | F99679-3 | Transverse Shift Lever | 1 | — |
| 140 | F99702 | Neutral Switch Plunger Pin | 1 | — |
| 141 | F99902-5 | Output Flange | 1 | — |
| 142 | F99983-1 | Compression Spring | 1 | — |
| 143 | GB1096-79-6X28 | Round-Head Plain Flat Key | 1 | — |
| 144 | GB890-80-M16X1.5 | Thin Hexagon Nut with N | 6 | — |
| 145 | GB890-80-M20X1.5 | Hexagon Nut with Nylon Ring Lock | 2 | — |
| 146 | HG4-333-66-12X1.9 | O-Ring | 1 | — |
| 147 | HG4-333-66-20X2.4 | O-Ring | 1 | — |
| 148 | J75-1601031 | Pipe Fitting | 1 | — |
| 149 | J75-1601033-1 | Lubrication Hose Assembly | 1 | — |
| 150 | J75-1601034 | Grease Cup Cover | 1 | — |
| 151 | J75-1601035 | Grease Cup Seat | 1 | — |
| 152 | JS100-1702051-3 | Dual H Control Device Housing | 1 | — |
| 153 | JS180-1601016-2 | Hand Hole Cover | 2 | — |
| 154 | NF2308 | Cylindrical Roller Bearing with Single Rib on Outer Ring | 2 | — |
| 155 | Q150B0610 | Hexagon Head Bolt | 1 | — |
| 156 | Q150B0822 | Hexagon Head Bolt | 4 | — |
| 157 | Q150B1025 | Hexagon Head Bolt | 5 | — |
| 158 | Q150B1032 | Hexagon Head Bolt | 26 | — |
| 159 | Q150B1035 | Hexagon Head Bolt | 2 | — |
| 160 | Q150B1040 | Hexagon Head Bolt | 18 | — |
| 161 | Q150B1095 | Hexagon Head Bolt | 5 | — |
| 162 | Q150B1238 | Hexagon Head Bolt | 4 | — |
| 163 | Q151B0812 | Hexagon Head Bolt | 4 | — |
| 164 | Q151B1050 | Hexagon Head Bolt | 1 | — |
| 165 | Q151B1645 | Hexagon Head Bolt | 2 | — |
| 166 | Q170B1016 | Hexagon Head Bolt with Hole in Head | 1 | — |
| 167 | Q170B1032 | Hexagon Head Bolt with Hole in Head | 2 | — |
| 168 | Q170B1095 | Hexagon Head Bolt with Hole in Head | 1 | — |
| 169 | Q218B0618 | Hexagon Socket Cylinder Head Screw | 2 | — |
| 170 | Q2713508 | Cross Recessed Pan Head Screw | 2 | — |
| 171 | Q2821212 | Flat-End Set Screw | 2 | — |
| 172 | Q2821616 | Flat-End Set Screw | 2 | — |
| 173 | Q340B20 | Hexagon Head Nut | 1 | — |
| 174 | Q341B10 | Type 1 Hexagon Nut | 1 | — |
| 175 | Q351B10 | Thin Hexagon Nut | 2 | — |
| 176 | Q361B10 | Type 2 Hexagon Nut | 2 | — |
| 177 | Q40116 | Washer | 6 | — |
| 178 | Q40306 | Spring Washer | 3 | — |
| 179 | Q40308 | Spring Washer | 4 | — |
| 180 | Q40310 | Spring Washer | 61 | — |
| 181 | Q40312 | Spring Washer | 4 | — |
| 182 | Q40320 | Spring Washer | 1 | — |
| 183 | Q40408 | Light-Duty Spring Washer | 4 | — |
| 184 | Q433120 | Flattened Wire Retaining Ring for Shaft | 1 | — |
| 185 | Q43495 | Flattened Wire Retaining Ring for Hole | 4 | — |
| 186 | Q5280310 | Elastic Cylindrical Pin | 1 | — |
| 187 | Q5280313 | Elastic Cylindrical Pin | 2 | — |
| 188 | Q5280514 | Elastic Cylindrical Pin | 4 | — |
| 189 | Q614B06 | Square Head Tapered Plug | 1 | — |
| 190 | Q614B10 | Square Head Tapered Plug | 2 | — |
| 191 | Q72216 | Bowl-Shaped Plug | 1 | — |
| 192 | Q72310T3 | Sealing Washer | 2 | — |
| 193 | Q72318T3 | Gasket | 1 | — |
| 194 | X-1-603 | Hexagon Nut | 2 | — |
| 195 | X-6-E | Woodruff Key | 2 | — |
| 196 | X11412 | Speedometer Protection Sleeve | 1 | — |
| ——END—— | ||||
Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
