Fast 7DS200 MT Parts
FAST 7DS200 transmission has 7 forward gears, the gear ratio steps are arranged reasonably, and has very outstanding fuel economy performance. With double intermediate shaft structure design and integrated with a synchronize, and the Maximum input speed is 2600 RPM. The length of the 7DS200 transmission is 934 mm. The 7DS200 manual transmission has 7 gears, and each gear has a different reduction ratio. The 1st gear reduction ratio is 9.139, the 2nd gear reduction ratio is 6.702, the 3rd gear reduction ratio is 4.853, the 4th gear reduction ratio is 3.600, the 5th gear reduction ratio is 2.651, the 6th gear reduction ratio is 1.612, the 7th gear reduction ratio is 1.000, and the reverse gear ratio is 8.509. The 7DS200 manual transmission has an input torque range of 2000 N.m.
Advantages of Fast 7DS200 MT Parts
-
It is synchronized with CMI’ advanced design and sophisticated manufacturing, adapts to harsh working conditions, and has high-intensity and heavy-duty work capabilities.
-
The Holset wastegate valve makes the low speed performance more perfect and the power performance better.
-
The cylinder block and cylinder head adopt integrated design to prevent the occurrence of engine water and oil leakage. The parts are 40% less than other similar engines, and the failure rate is greatly reduced.
-
The cylinder liner adopts a platform mesh honing design, which effectively prevents oil leakage with a perfect geometric structure, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.
-
Using forged steel camshaft and crankshaft, high-strength cylinder design, many parts are cast on the cylinder, with high rigidity, high pressure resistance, good reliability and longer service life.
Technical Specifications
Basic Introduction of Shaanxi Fast 7DS200 MT
| Transmission Model: | 7DS200 |
| Transmission Application: | Manual Transmission |
| Input Torque: | 2000 N.m |
| Maximum Speed: | 2600 RPM |
| Installation length: | 934 mm |
| Weight Iron/Al Alloy: | 388 Kg |
| Fuel Quantity: | 22 L |
| Speed Ratio: | 9.139-1 |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
Search by Part No. or Part Name
Click Kit Name to Check Part List
- Clutch Housing Assembly
- Input Shaft Assembly
- Transmission Housing Assembly
- Left Countershaft Assembly
- Right Countershaft Assembly
- Output Shaft Assembly
- Rear Cover Housing and Reverse Countershaft Assembly
- Control Device Assembly
- Rear Bearing Cover Assembly
- Upper Cover Assembly
- QH70L PTO Assembly
- Other Parts
No. | Part No. | Name | Qty. | Remarks |
| 1 | Q1421032M | Pre-Coated Hexagon Head Bolt and Spring Washer Assembly | 3 | — |
| 2 | 6DS240T-1701040 | Input Shaft Bearing Cover | 1 | — |
| 3 | Q1421032M | Pre-Coated Hexagon Head Bolt and Spring Washer Assembly | 3 | — |
| 4 | F500A-1802191 | Oil Seal | 1 | — |
| 5 | 10JSQX180-1701042 | Input Shaft Bearing Cover Gasket | 1 | — |
| 6 | Q150B16110M | Hexagon Head Bolt | 2 | — |
| 7 | Q40316 | Spring Washer | 2 | — |
| 8 | C01056 | Stud Bolt | 10 | — |
| 9 | Q40116 | Flat Washer | 10 | — |
| 10 | GB889.2-2000-M16X1.5 | Hexagon Nut with Nylon Ring Lock M16×1.5 | 10 | — |
| 11 | JS180-1601029-1 | Dust Cover | 2 | — |
| 12 | JS180-1601030-2 | Shift Fork Bushing | 2 | — |
| 13 | Q43042 | Circlip for Hole | 2 | — |
| 14 | Q43125 | Circlip for Shaft | 2 | — |
| 15 | GB304-64UC25 | Spherical Plain Bearing | 1 | — |
| 16 | Q1421235 | Hexagon Head Bolt and Spring Washer Assembly | 4 | — |
| 17 | 7DS180-1601024-1 | Shift Fork Bracket | 1 | — |
| 18 | 7DS180-1601021-1 | Release Fork | 1 | — |
| 19 | JS180-1601023-3 | Shift Fork Shaft | 1 | — |
| 20 | J75-1601033-1 | Lubrication Hose Assembly | 1 | — |
| 21 | J75-1601031 | Pipe Fitting | 1 | — |
| 22 | J75-1601034 | Grease Cup Cover | 1 | — |
| 23 | J75-1601035 | Grease Cup Seat | 1 | — |
| 24 | Q72310T3 | Sealing Ring | 2 | — |
| 25 | 7DS180-1601015 | Clutch Housing | 1 | — |
| 26 | C04004-6 | Clutch Hand Hole Cover | 1 | — |
| 27 | Q1420820 | Hexagon Head Bolt and Spring Washer Assembly | 2 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | 7DS180-1701030 | Input Shaft | 1 | — |
| 2 | 7DS180-1701031 | Input Shaft Gear | 1 | — |
| 3 | 7DS180-1701028 | Retaining Ring | 1 | — |
| 4 | 7DS180-1701029 | Gear Spacer Washer | 1 | — |
| 5 | 6214X3-ZNBR-C3 | Bearing (with Retaining Ring) | 1 | — |
| 6 | Q43170 | Circlip for Shaft | 1 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | Q1231690 | Stud Bolt | 2 | — |
| 2 | Q341B16 | Hexagon Nut | 2 | — |
| 3 | Q40316 | Spring Washer | 2 | — |
| 4 | 7DS180-1702016 | Top Cover Gasket | 1 | — |
| 5 | 7DS180-1701071-1 | Rear Cover Gasket | 1 | — |
| 6 | 7DS180-1701015-1 | Transmission Housing | 1 | — |
| 7 | 6JS160T-1709587-1 | Oil Plug | 3 | — |
| 7 | 6JS160T-1709588-1 | O-Ring | 3 | — |
| 8 | 7DS180-1601016 | Clutch Housing Gasket | 1 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | 7DS180-1701056 | Countershaft Drive Gear | 1 | — |
| 2 | 12JS280T-1701058 | Spacer Sleeve | 1 | — |
| 3 | 7DS180-1701054 | Countershaft 6th Gear | 1 | — |
| 4 | 7DS180-1701053 | Countershaft 5th Gear | 1 | — |
| 5 | 7DS180-1701052 | Countershaft 4th Gear | 1 | — |
| 6 | 7DS180-1701048 | Countershaft | 1 | — |
| 7 | 7DS200-1701049 | Left Rear Countershaft | 1 | — |
| 8 | Q5280514 | Elastic Cylindrical Pin | 1 | — |
| 9 | 7DS180-1701051 | Countershaft Square Key | 1 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | 7DS180-1701056 | Countershaft Drive Gear | 1 | — |
| 2 | 12JS280T-1701058 | Spacer Sleeve | 1 | — |
| 3 | 7DS180-1701054 | Countershaft 6th Gear | 1 | — |
| 4 | 7DS180-1701053 | Countershaft 5th Gear | 1 | — |
| 5 | 7DS180-1701052 | Countershaft 4th Gear | 1 | — |
| 6 | 7DS180-1701048 | Countershaft | 1 | — |
| 7 | 7DS200-1701050 | Left Rear Countershaft | 1 | — |
| 8 | Q5280514 | Elastic Cylindrical Pin | 1 | — |
| 9 | 7DS180-1701051 | Countershaft Square Key | 1 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | Q43130 | Circlip for Shaft | 1 | — |
| 2 | 502706KH | Bearing | 1 | — |
| 3 | 7DS180-1701108 | 4th/5th/6th/7th Gear Sliding Sleeve | 2 | — |
| 4 | 7DS180-1701116-1 | Main Shaft 6th Gear | 1 | — |
| 5 | 7DS180-1701115-1 | Main Shaft 5th Gear | 1 | — |
| 6 | 16JS200-1701122 | Main Shaft Gear Washer | 3 | — |
| 7 | 7DS180-1701114-1 | Main Shaft 4th Gear | 1 | — |
| 8 | 7DS180-1701125-1 | 3rd Gear Baffle | 1 | — |
| 9 | 7DS180-1701113-1 | Main Shaft 3rd Gear | 1 | — |
| 10 | 7DS180-1701112-1 | Main Shaft 2nd Gear | 1 | — |
| 11 | 7DS180-1701123 | Main Shaft 1st/2nd Gear Spacer Sleeve | 1 | — |
| 12 | 7DS200-1701111 | Main Shaft 1st Gear | 1 | — |
| 13 | 7DS180-1701109 | Reverse/1st/2nd/3rd Gear Sliding Sleeve | 2 | — |
| 14 | 7DS180-1701127 | Low Gear Adjustment Washer | 3 | — |
| 15 | 7DS180-1701110-1 | Main Shaft Reverse Gear | 1 | — |
| 16 | 7DS180-1701121 | Reverse Gear Baffle | 1 | — |
| 17 | 7DS180-1701105 | Main Shaft | 1 | — |
| 18 | Q5280310 | Elastic Cylindrical Pin | 2 | — |
| 19 | 7DS180-1701131 | Front Section Hexagonal Key of Main Shaft | 2 | — |
| 20 | Q5210612 | Cylindrical Pin | — | — |
| 21 | 7DS180-1701132 | Middle Section Hexagonal Key of Main Shaft | 2 | — |
| 22 | 7DS180-1701133 | Rear Section Hexagonal Key of Main Shaft | 2 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | Q65312 | End Right-Angle Pipe Joint Body | 2 | — |
| 2 | 7DS180-1707070 | C-Type Crimped Rubber Hose Assembly | 2 | — |
| 3 | 7DS180-170107052 | Right Countershaft Rear Bearing Cover | 1 | — |
| 4 | Q65412 | Flared Tapered Thread Right-Angle Pipe Joint Body | 2 | — |
| 5 | QQ60-4211127 | Oil Filter Plug | 1 | — |
| 6 | JS180-1707053 | Countershaft Bearing Cover Gasket | 2 | — |
| 7 | Q1421032 | Hexagon Head Bolt and Spring Washer Assembly | 4 | — |
| 8 | 14334 | Rear Cover Locating Pin | 2 | — |
| 9 | J80-1701089 | O-Ring | 4 | — |
| 10 | 7DS180-1701083 | Reverse Countershaft | 2 | — |
| 11 | 7DS180-1701070-3 | Rear Cover Housing | 1 | — |
| 12 | WU-16X180 | Mesh Type Oil Filter | 1 | — |
| 13 | 7DS180-1701088 | Reverse Thrust Washer | 4 | — |
| 14 | 30643-32 | Needle Roller Bearing | 2 | — |
| 15 | 7DS180-1701082 | Reverse Counter Gear | 2 | — |
| 16 | Q5280308 | Elastic Cylindrical Pin | 4 | — |
| 17 | 7DS180-1705011 | Oil Delivery Pipe | 1 | — |
| 18 | J80-1701084 | Reverse Gear Shaft Locking Plate | 2 | — |
| 18 | Q1421020 | Hexagon Head Bolt and Spring Washer Assembly | 2 | — |
| 19 | Q1420620M | Pre-Coated Hexagon Head Bolt and Spring Washer Assembly | 4 | — |
| 21 | CB-B4F | Cycloidal Gear Pump | 1 | — |
| 22 | QQ60-4211119-1 | Gear Pump Gasket | 1 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | F96035-48 | LRC External Shift Arm | 1 | — |
| 2 | Q40310 | Washer | 1 | — |
| 3 | Q341B10 | Nut | 1 | — |
| 4 | Q151B1050 | Hexagon Head Bolt – Fine Thread | 1 | — |
| 5 | C03032-11 | Shift Joint | 1 | — |
| 6 | F91345 | Transverse Shift Lever Bushing | 2 | — |
| 7 | C03033-8 | End Cover | 1 | — |
| 8 | C03034-4 | Baffle Gasket | 1 | — |
| 9 | C03031-4 | Splined Sleeve | 1 | — |
| 10 | F99679-36 | Dual H Left Control Device Housing | 1 | — |
| 11 | C03030 | Cylindrical Pin | 1 | — |
| 12 | F99585-1 | Shift Head | 1 | — |
| 13 | Q151B1030 | Hexagon Head Bolt | 4 | — |
| 14 | Q40310 | Washer | 4 | — |
| 15 | F96194-31 | Dual H Left Control Housing | 1 | — |
| 16 | 990.1271.0041-3 | Pressure Switch (Neutral) | 1 | — |
| 17 | Q72318T3 | Sealing Washer | 1 | — |
| 18 | 791.0071.0068-1 | Pressure Switch (Reverse) | 1 | — |
| 19 | Q72318T3 | Sealing Washer | 1 | — |
| 20 | C03038-28 | Shift Selection Joint | 1 | — |
| 21 | C03037-1 | Window Cover Gasket | 1 | — |
| 22 | C03035-1 | Shift Selection Head | 1 | — |
| 23 | C03036-1 | Window Cover | 1 | — |
| 24 | Q5510628 | Plain Flat Key | 1 | — |
| 25 | Q150B1025 | Hexagon Head Bolt | 2 | — |
| 26 | Q40310 | Washer | 2 | — |
| 27 | Q72224 | Bowl-Shaped Plug | 1 | — |
| 28 | F99670-3 | Tactile Plunger Pin | 1 | — |
| 29 | Nov-74 | Reverse Lock Spring | 1 | — |
| 30 | Q72324T3 | Sealing Washer | 1 | — |
| 31 | F96141-2 | Tactile Plug | 1 | — |
| 32 | 15276-2 | Vent Plug Assembly | 1 | — |
| 33 | F99681-7 | Control Block | 1 | — |
| 34 | C09035 | Elastic Cylindrical Pin | 1 | — |
| 35 | F91345 | Transverse Shift Lever Bushing | 1 | — |
| 36 | F99983 | Compression Spring | 1 | — |
| 37 | F99673 | Spring Seat | 1 | — |
| 38 | DS100-1703024-1 | Limit Sleeve | 1 | — |
| 39 | C09035 | Elastic Cylindrical Pin | 1 | — |
| 40 | C03004 | Set Screw | 1 | — |
| 41 | F99674 | Spring Spacer Sleeve | 1 | — |
| 42 | F99673 | Spring Seat | 1 | — |
| 43 | F96036-1 | Compression Spring | 1 | — |
| 44 | F99672 | End Gasket | 1 | — |
| 45 | F99666 | Side Plate | 1 | — |
| 46 | Q1420822 | Hexagon Head Bolt and Spring Washer Assembly | 4 | — |
| 47 | C03039-1 | Washer | 1 | — |
| 48 | Q170B1016 | Hexagon Head Bolt with Hole in Head | 1 | — |
| ——END—— | ||||
No. |
Part No. |
Name |
Qty. |
Remarks |
| 1 | Q170B1095 | Hexagon Head Bolt with Hole in Head | 1 | — |
| 2 | Q1421095 | Hexagon Head Bolt and Spring Washer Assembly | 5 | — |
| 3 | Q40310 | Spring Washer | 1 | — |
| 4 | 19109-5 | Oil Seal | 1 | — |
| 5 | C03054-16 | Electronic Speedometer Sensor Assembly | 1 | — |
| 6 | 7DS180-1701155-3 | Main Shaft Rear Bearing Cover | 1 | — |
| 7 | 7DS180-1701151-3 | Main Shaft Rear Bearing Cover Gasket | 1 | — |
| ——END—— | ||||
No. |
Part No. |
Name |
Qty. |
Remarks |
| 1 | 7DS180-1702015 | Top Cover | 1 | — |
| 2 | 7DS180-1702066 | 6th/7th Gear Shift Fork Shaft | 1 | — |
| 3 | 7DS180-1702058 | 6th/7th Gear Shift Fork | 1 | — |
| 4 | DS100-1702054 | 6th/7th Gear Guide Block | 1 | — |
| 5 | 7DS180-1702053 | 4th/5th Gear Guide Block | 1 | — |
| 6 | 7DS180-1702057 | 4th/5th Gear Shift Fork | 1 | — |
| 7 | 7DS180-1702065 | 4th/5th Gear Shift Fork Shaft | 1 | — |
| 8 | 7DS180-1702055 | 1st/Reverse Gear Shift Fork | 1 | — |
| 9 | 7DS180-1702063 | 1st/Reverse Gear Shift Fork Shaft | 1 | — |
| 10 | 7DS180-1702064 | 2nd/3rd Gear Shift Fork Shaft | 1 | — |
| 11 | 7DS180-1702056 | 2nd/3rd Gear Shift Fork | 1 | — |
| 12 | Q72216 | Bowl-Shaped Plug | 1 | — |
| 13 | 1634 | Shift Fork Shaft Interlock Pin | 2 | — |
| 14 | 19.5G100BGB-T308 | Steel Ball | 3 | — |
| 15 | 3220 | Shift Fork Locking Screw | 7 | — |
| 16 | 12.7G100BGB-T308 | Steel Ball | 4 | — |
| 17 | 11066 | Stud Bolt | 4 | — |
| 18 | X-1-603 | Hexagon Nut | 2 | — |
| 19 | Q351B10 | Thin Hexagon Nut | 1 | — |
| 20 | F96084 | Compression Spring | 1 | — |
| 21 | F96085 | Compression Spring | 3 | — |
| 22 | DS100-1702051 | 1st/Reverse Gear Guide Block | 1 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | 20971101 | PTO (Power Take-Off) Housing | 1 | — |
| 2 | QH70-4211102 | Hollow Shaft | 1 | — |
| 3 | QH70-4211103 | Bearing Spacer Sleeve | 1 | — |
| 4 | QCZ50-4211310 | Sleeve | 1 | — |
| 5 | 20971105 | Input Gear | 1 | — |
| 6 | QH70-4211106 | Bearing Baffle | 1 | — |
| 7 | QH70-4211107 | End Cover | 1 | — |
| 8 | QH70-4211108 | End Cover Gasket | 1 | — |
| 9 | 20971110 | Side Cover Gasket | 1 | — |
| 10 | 20971111-1 | Side Cover | 1 | — |
| 11 | 20971119 | Nameplate | 1 | — |
| 12 | 20971201 | Output Gear Shaft | 1 | — |
| 13 | QH70-4211202 | Baffle | 1 | — |
| 14 | QH70-4211203 | Adjustment Shim | 1 Set | — |
| 15 | QH70-4211204-1 | Flange | 1 | — |
| 16 | QH70-4211206 | Bearing Cover | 1 | — |
| 17 | QH70-4211208 | Paper Gasket | 1 | — |
| 18 | QH70C-4211301 | Shift Fork | 1 | — |
| 19 | QH70-4211302 | Clutch Sleeve | 1 | — |
| 20 | QH70-4211303 | Cylinder Head Gasket | 1 | — |
| 21 | QH70-4211304-1 | Cylinder Head | 1 | — |
| 22 | QH70-4211305-1 | Piston Fork Shaft | 1 | — |
| 23 | QC45-4211306 | Cylinder Block | 1 | — |
| 24 | QH70-4211307 | Cylinder Gasket | 1 | — |
| 25 | QH70-4211310 | Speedometer Protection Sleeve | 1 | — |
| 26 | QC45-4211311 | Piston | 1 | — |
| 27 | GB3452.1 | O-Ring (16×2.65) | 1 | — |
| 28 | J80-1701133 | 4th Gear Bearing Spacer Sleeve | 1 | — |
| 29 | JS180-1707053-2 | Auxiliary Case Countershaft Bearing Cover Gasket | 1 | — |
| 30 | J80-1702028 | O-Ring (25×2.4) | 2 | — |
| 31 | J80-1702083 | Iron Wire (Φ1.2) | 1 | — |
| 32 | J80-1702083 | Set Screw | 1 | — |
| 33 | QC45-4211300 | O-Ring (43.7×3.55) | 2 | — |
| 34 | Q5410206 | Nameplate Rivet | 2 | — |
| 35 | F500A-1802191 | Skeleton Oil Seal Assembly | 2 | — |
| 36 | QL40B-4211311B | Return Spring | 1 | — |
| 37 | Q1421035 | Hexagon Head Bolt | 4 | — |
| 38 | Q218B1235T | Hexagon Head Bolt | 7 | — |
| 39 | Q218B1030 | Hexagon Socket Cylinder Head Screw | 9 | — |
| 40 | GB119.2 | Cylindrical Pin (12×35) | 2 | — |
| 41 | Q62103 | Square-Groove Tapered Magnetic Plug | 1 | — |
| 42 | GB21-76 | Small Hexagon Head Bolt M16×1.5×30 | 1 | — |
| 43 | Q151B1035 | Hexagon Head Bolt | 1 | — |
| 44 | Q1421090 | Hexagon Head Bolt | 3 | — |
| 45 | GB889-86 | Type I Hexagon Lock Nut with Non-Metallic Insert M12 | 1 | — |
| 46 | 54010 | CA Bowl-Shaped Plug | 2 | — |
| 47 | 32208 | Tapered Roller Bearing (GB/T297-94) | 2 | — |
| 48 | Q5280310 | Elastic Cylindrical Pin | 2 | — |
| 49 | 990.12.71.0041 | Pressure Switch | 1 | — |
| 50 | 42111 | Bearing (Φ55×Φ90×18) | 1 | — |
| 51 | K637120 | Needle Roller Bearing (GB5846-86) | 2 | — |
| 52 | Q1421030 | Small Hexagon Head Bolt | 4 | — |
| ——END—— | ||||
No. | Part No. | Name | Qty. | Remarks |
| 1 | 20JS200-1703016 | Control Window Gasket | 1 | — |
| 2 | 20815 | Lifting Bent Plate | 2 | — |
| 3 | F96006-1 | Flange Nut | 1 | — |
| 4 | F96119 | Dust Cover | 1 | — |
| 5 | 7DS180-1701159 | Output Flange | 1 | — |
| 6 | 192311E | Bearing | 2 | Rear of Countershaft |
| 7 | Q433120 | Retaining Ring | 2 | Rear Cover, Rear of Main Shaft |
| 8 | JS180-1707051 | Retaining Ring | 2 | Rear of Countershaft |
| 9 | 192309E | Bearing | 2 | Front of Countershaft |
| 10 | C01021 | Retaining Ring | 2 | Front of Countershaft |
| 11 | 7DS180-1701223-2 | Output Bearing | 1 | Rear of Main Shaft |
| 12 | QQ60-4211136 | Joint | 1 | Mounted on Gear Pump |
| ——END—— | ||||
Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
